Ana Industries India Ana Industries P. LTd.

Home ***** Contact Ana Industries

Potassium Bromate SDS, Safety Data Sheet or MSDS of Manufacturer Exporter

Export Cargo Ex-stock by air Drum Packing Drums Pail Jar Chemical Bottle Bottle Pack Small Pack Big Bags IBC Pallets

Potassium Bromate Manufacturer

Potassium Bromate Specifications of Manufacturer

Potassium Bromate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Product Name & Other Names: Potassium Bromate.
CAS Number 7758-01-2
EINECS EC No.: 231-829-8
Molecular Weight: 167.00
Chemical Formula: KBrO3
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910

Classification according to Regulation (EC) No 1272/2008
Oxidizing liquids; Oxidizing solids Category 1 - H271
Acute toxicity, oral Category 3 - H301
Carcinogenicity Category 1B - H350

Labeling according GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Oxidizing Solid
Oxidizing Solid
GHS Label Elements
toxic.png
Toxic
GHS Label Elements
healthhazard.png
Health Hazard

Signal Words: Danger

Hazard statements:
H271: May cause fire or explosion; strong oxidizer.
H301: Toxic if swallowed.
H350: May cause cancer.

Precautionary statements:
P201: Obtain special instructions before use.
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P220: Keep/Store away from clothing/…/combustible materials.
P221: Take any precaution to avoid mixing with combustibles.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P308 + P313: IF exposed or concerned: Get medical advice/ attention.
P370+378: In case of fire: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide for extinction.
P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P391: Collect spillage.
P405: Store locked up.
P501: Dispose of contents/container to authorized agents only.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
T = Toxic
O = Oxidizer
Xn = Harmful
Risk Phrases:
R 8 = Contact with combustible material may cause fire.
R 25 = Toxic if swallowed.
R45 May cause cancer.

3. Composition/Information on Ingredients

Product: Potassium Bromate.
CAS No.: 7758-01-2
EINECS EC No.: 231-829-8

4. First Aid Measures

Always get medical attention after the first aid is over.

Inhalation: If inhaled, remove to fresh air. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If this material are swallowed, call a physician immediately. Loosen tight clothing. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.

5. Fire Fighting Measures

Fire: Not combustible, but substance is a strong oxidizer and its heat of reaction with reducing agents or combustibles may cause ignition.
Explosion: May explode when shocked, exposed to heat or flame, or by spontaneous chemical reaction. Sealed containers may rupture when heated. Sensitive to mechanical impact.
Fire Extinguishing Media: Dry chemical, carbon dioxide, Halo, water spray, or fog. If water is used, apply from as far a distance as possible. Water spray may be used to keep fire exposed containers cool. Do not allow water runoff to enter sewers or waterways. Use flooding quantities of water as spray. Cool containers with flooding quantities of water until well after fire is out.
Special Information: Wear full protective clothing and breathing equipment for high-intensity fire or potential explosion conditions. This oxidizing material can increase the flammability of adjacent combustible materials.
Special hazards arising from the substance or mixture: Hydrogen bromide gas, Potassium oxides.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Oxidizing material.Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Keep the substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas; dike if needed. Call for assistance on disposal.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Provide appropriate exhaust ventilation at places where dust is formed. Keep away from sources of ignition - No smoking. Keep away from heat and sources of ignition. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong reducing agents, powdered metals, strong acids. Avoid storage on wood floors. Separate from incompatibles, combustibles, organic or other readily oxidizable materials. Containers may be hazardous when empty since they retain product residues.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: TWA 0.1 mg/m3 USA, Workplace Environmental Exposure Levels (WEEL).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: Off-white crystals or powder.
Odor: Odorless.
Odor threshold: Not available.
pH: 5 - 9
Relative density: 3.2
Boiling Point: Decomposes
Melting Point: 350C Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in water
Viscosity: Not available.
Molecular Weight: 167.00
Chemical Formula: KBrO3

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage. It is hygroscopic and must be packed well.
Hazardous Decomposition Products: Bromine or hydrogen bromide and toxic metal fumes may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Avoid all strong reducing agents, powdered metals, strong acids.
Conditions to Avoid: Heat, flames, organic materials, ignition sources and incompatibles.

11. Toxicological Information

Acute toxicity: LD50 Oral - Rat - 157 mg/kg
Carcinogenicity: This product is or contains a component that has been reported to be probably carcinogenic based on its IARC, OSHA, ACGIH, NTP, or EPA classification. Possible human carcinogen.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

12. Ecological Information

Toxicity to fish LC50: Not available
Environmental Toxicity: Toxic to aquatic organisms.
Persistence and degradability: No data available
Bioaccumulative potential: No data available
Mobility in soil: No data available

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. Dispose of container and unused contents in accordance legal requirements.

14. Transport Information

Domestic (Land, D.O.T.)
Proper Shipping Name: POTASSIUM BROMATE
Hazard Class: 5.1 Oxidizing material.
UN/NA: UN1484
Packing Group: II
International (Water, I.M.O.)
Proper Shipping Name: POTASSIUM BROMATE
Hazard Class: 5.1 Oxidizing material.
UN/NA: UN1484
Packing Group: II
International (Air, I.C.A.O.)
Proper Shipping Name: POTASSIUM BROMATE
Hazard Class: 5.1 Oxidizing material.
UN/NA: UN1484
Packing Group: II

15. Regulatory Information

USA:
SARA Section 302 Extremely Hazardous Substances: None of the chemicals in this product have a TPQ.
Section 313: Listed.
SARA 311/312: Acute, Chronic: Fire; Reactivity.

16. Other Information

H271: May cause fire or explosion; strong oxidizer.
H301: Toxic if swallowed.
H350: May cause cancer.
T = Toxic
O = Oxidizer
Xn Harmful
R45 May cause cancer
R 25 = Toxic if swallowed.
R 8 = Contact with combustible material may cause fire.

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Contact Potassium Bromate Manufacturers Suppliers Exporters:

Ana Industries P. LTd.
email: info@anaindustries.org
Call: +912223774610
Houston USA, Dubai UAE Dahej & Mumbai India.