Ana Industries P. LTd. Potassium Monopersulfate or Potassium Monopersulphate SDS, Safety Data Sheet or MSDS of Manufacturer Exporter
Potassium Monopersulfate or Potassium Monopersulphate Specifications of Manufacturer
Potassium Monopersulfate or Potassium Monopersulphate (or peroxymonopersulfate) Triple Salt SDS, Safety Data Sheet.
MSDS Sheet, Material Safety Data Sheet1. Product Identification
Product Name/Synonyms: Potassium peroxymonosulfate triple salt or Potassium monopersulfate triple salt Potassium monopersulphate triple salt.
CAS Number 70693-62-8
EINECS EC Number: 274-778-7
Molecular Weight: 614.76
Chemical Formula: 2KHSO5.KHSO4.K2SO4
Recommended usage: Industrial Manufacturing.2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Oxidizing solids Category 3 - H272
Acute toxicity, oral Category 4 - H302
Skin corrosion/irritation Category 1A, B, C - H314
Specific target organ toxicity (single exposure) Target Organs - Respiratory system Category 3 - H335
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Corrosive GHS Label Elements
Oxidizing SolidSignal Words: Danger
Hazard statements:
H272: May intensify fire; oxidizer.
H302: Harmful if swallowed.
H314: Causes severe skin burns and eye damage.
H335: May cause respiratory irritation.Precautionary statements:
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P220: Keep/Store away from clothing/…/combustible materials.
P221: Take any precaution to avoid mixing with combustibles.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash with plenty of water and soap thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P281: Wear protective equipment for hands, eyes, face and respiratory tract.
P330: Rinse mouth.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P370+378: In case of fire: Water can be used for extinction.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P362: Take off contaminated clothing and wash before reuse.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
O Oxidizing
C Corrosive
Xn Harmful
Xi Irritant
Risk Phrases:
R8 Contact with combustible material may cause fire
R22 Harmful if swallowed
R34 Causes burns
R36/37/38 Irritating to eyes, respiratory system and skin
R41 Risk of serious damage to eyes
R42/43 May cause sensitization by inhalation and skin contact3. Composition/Information on Ingredients
Ingredients ----------------- Chemical Formula --- CAS No. ----- Percentage
Potassium Monopersulfate - KHSO5 -------------- 10058-23-8 -- 43.0 -45%
or Potassium peroxymonosulfate
Potassium Bisulfate -------- KHSO4 -------------- 7646-93-7 --- 23.0
Potassium Sulfate -----------K2SO4 -------------- 7778-80-5 --- 32.04. First Aid Measures
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: If swallowed, Do not induce vomiting. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact: In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Cover the irritated skin with an emollient. Cold water may be used. Wash clothing & shoes before reuse. Get medical attention.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.5. Fire Fighting Measures
Fire: It is not combustible, but substance is a strong oxidizer and its heat of reaction with reducing agents or combustibles may cause ignition. Heating which may intensify combustion in an existing fire.
Explosion: An explosion hazard when mixed with finely powdered organic matter, metal powder, or reducing agents. Avoid grinding or intense mixing.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire Water can be used.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. Sealed containers may rupture when heated.6. Accidental Release Measures
Personal precautions, protective equipment, environmental precautions and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material. Keep away from drains, surface and groundwater and soil.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: It is an oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep damp using water spray. Do not touch spilled material. Prevent entry into sewers. Eliminate all ignition sources. Do not touch or walk through spilled material.7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices with proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Prevent any contact with hot surfaces. Containers of this material may be hazardous when empty since they retain product residues.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like reducing agents, organic material, sodium peroxide, water and powdered metals especially aluminum. Moisture must be avoided. Avoid storage on wood floors. Containers may be hazardous when empty.8. Exposure Controls/Personal Protection
Airborne Exposure Limits:
TWA: 5 (mg/m3) from OSHA (PEL) [United States] Inhalation Respirable.
USA ACGIH TLV: TWA: 0.1 mg/m3.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.9. Physical and Chemical Properties
Appearance: Potassium peroxymonosulfate or Potassium Monosulfate is white crystals.
Odor: Odorless.
Odor threshold: Not available.
pH: 2.3 at 10g/1000 ml water @ 20C
Relative density: 1.98
Melting point/freezing point: 120C (248F) Decomposes.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: 256 g/l000 ml water @ 20C
Viscosity: Not available.10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage. Stability decreases in the presence of moisture.
Hazardous Decomposition Products: Decomposed by moisture to form oxygen and ozone.
Hazardous Polymerization: Will not occur.
Incompatibilities: Reducing agents, organic material, sodium peroxide, water and powdered metals especially aluminum. Heat and Strong bases & Acids must be avoided.
Conditions to Avoid: Moisture, combustible materials and incompatibles.11. Toxicological Information
LD50 Oral: 2000 mg/kg, rat
LD50 Dermal: >11000 mg/kg, rabbit
Carcinogenic Effects: None of the components present in this material at concentrations equal to or greater than 0.1 % are listed by IARC, NIP, OSHA or ACGIH as a Carcinogen.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.12. Ecological Information
Environmental Toxicity: No information found.
Mobility: No information available. Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No information available.13. Disposal Considerations
Whatever cannot be saved for recovery should be handled as hazardous waste and sent to a approved waste facility. Dispose of container and unused material in accordance with law.
14. Transport Information
DOT (USA)
UN-Number: 3084 Class: 8 (5.1) Packing group: II
Proper shipping name: Corrosive solids, oxidizing, n.o.s. (Potassium hydrogenperoxomonosulphate)
IMDG
UN-Number: 3084 Class: 8 (5.1) Packing group: II EMS-No: F-A, S-Q
Proper shipping name: CORROSIVE SOLID, OXIDIZING, N.O.S. (Potassium hydrogenperoxomonosulphate)
IATA
UN-Number: 3084 Class: 8 (5.1) Packing group: II
Proper shipping name: Corrosive solid, oxidizing n.o.s. (Potassium hydrogenperoxomonosulphate)15. Regulatory Information
USA FEDERAL REGULATIONS:
SARA Section: Yes
SARA (313) Chemicals: NoSection 16 - Additional Information
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Contact Potassium Monopersulfate or Potassium Monopersulphate Manufacturers Suppliers Exporters:
Ana Industries P. LTd.
email: info@anaindustries.org
Call: +912223774610
Houston USA, Dubai UAE Dahej & Mumbai India.