Ana Industries India Ana Industries P. LTd.

Home ***** Contact Ana Industries

Sodium Percarbonate Coated and Uncoated DS, Safety Data Sheet or MSDS of Manufacturer Exporter

Export Cargo Ex-stock by air Drum Packing Drums Pail Jar Chemical Bottle Bottle Pack Small Pack Big Bags IBC Pallets

Sodium Percarbonate Manufacturer

Sodium Percarbonate Specifications of Manufacturer

Sodium Percarbonate Coated and Uncoated SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet

1. Product Identification

Product Name/Synonyms: Sodium carbonate peroxyhydrate or Sodium Percarbonate Coated and Uncoated.
CAS Number 15630-89-4
EINECS: EC Number: 239-707-6
Molecular Weight: 156.98
Chemical Formula: Na2CO3-1.5 H2O2
Relevant uses and uses advised against (if any): Industrial Manufacturing.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910

Classification according to Regulation (EC) No 1272/2008:
Oxidizing solids Category 2, H272
Acute Toxicity Oral Category 4, H302
Serious eye damage Category 1, H318

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Oxidizing Solid
Oxidizing Solid
GHS Label Elements
corrosive.png
Corrosive

Signal Word: Danger

Hazard Statements:
H272: May intensify fire; oxidizer.
H302: Harmful if swallowed.
H318: Causes serious eye damage.

Precautionary Statements
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P220: Keep/Store away from clothing/…/combustible materials.
P221: Take any precaution to avoid mixing with combustibles.
P264 Wash thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P301+P330+P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P362: Take off contaminated clothing and wash before reuse.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
O Oxidizing
Xn Harmful
Risk Phrases:
R 8 = Contact with combustible material may cause fire.
R22 = Harmful if swallowed.
R41 Risk of serious damage to eyes.

3. Composition/Information on Ingredients

Product Name/Synonyms: Sodium carbonate peroxyhydrate or Sodium Percarbonate Coated and Uncoated. It is between 90% and 100%. No Hazardous chemicals are used in coating.
CAS No.: 15630-89-4
EINECS: EC Number: 239-707-6

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Rinse mouth. Do not induce vomiting Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Notes to Physician: Treat symptomatically

5. Fire Fighting Measures

Flammability of the Product: The product is not flammable but it is an oxidizer.
Flash Points: NA.
Products of Combustion: It emits toxic oxides of sodium and oxides of.
Fire: It is an oxidizer.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. Use water spray to cool unopened containers.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Contain spilled material. Sweep up and shovel. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like water, acids, bases, heavy metal salts, reducing agents, organic materials, flammable materials, combustible material. Keep away from sources of ignition - No smoking. Moisture and heat sensitive.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: White spherical granules or crystals or powder.
Odor: Odorless.
Odor threshold: Not available.
pH: 10-11 at 1% solution at 20 C.
Relative density: Not available.
Melting point/freezing point: Not available.
Boiling Point: Decomposes.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in water
Viscosity: Not available.
Molecular Weight: 156.98
Chemical Formula: Na2CO3-1.5 H2O2

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage.
Reactivity:  Decomposes when moist. Decomposes on heating. Potential for exothermic hazard
Hazardous Decomposition Products: It emits sodium oxide and carbon oxides when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Water, Acids, Bases, Heavy metal salts, Reducing agents, Organic materials, Flammable materials, Combustible material.
Conditions to Avoid: Moisture, Heat, Incompatibles.

11. Toxicological Information

Routes of Entry: Inhalation, Ingestion, Contact.
Toxicity to Animals:
LD50 Oral - Rat: 1034 mg/kg
LC0 Inhalation Rat 1 h: > 4,580 mg/m3
LD10 Dermal Rabbit: > 2,000 mg/kg.
Carcinogenicity: This product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity: Not available
Developmental Toxicity: Not available.

12. Ecological Information

Toxicity to fish: LC50 - Pimephales promelas (fathead minnow) - 70.7 mg/l - 96 h.
Toxicity to daphnia & other aquatic invertebrates: EC0 - Daphnia magna (Water flea) - 4.9 mg/l - 48 h.
Persistence and Degradability: Soluble in water Persistence is unlikely.
Bioaccumulation/ Accumulation: No information available.
Mobility: Will likely be mobile in the environment due to its water solubility.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.

14. Transport Information

DOT (USA) & ADR/RID
UN-Number: UN 3378 Class: 5.1 Packing group: II
Proper shipping name: SODIUM CARBONATE PEROXYHYDRATE
IMDG
UN-Number: UN 3378 Class: 5.1 Packing group: II
Proper shipping name: SODIUM CARBONATE PEROXYHYDRATE
IATA
UN-Number: UN 3378 Class: 5.1 Packing group: II
Proper shipping name: SODIUM CARBONATE PEROXYHYDRATE.

15. Regulatory Information

USA:
SARA 313 Components: SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: Acute Health Hazard, Chronic Health Hazard
California Prop 65: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Section 16 - Additional Information

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

 

Contact Sodium Percarbonate Manufacturers Suppliers Exporters:

Ana Industries P. LTd.
email: info@anaindustries.org
Call: +912223774610
Houston USA, Dubai UAE Dahej & Mumbai India.