Ana Industries India Ana Industries P. LTd.

Home ***** Contact Ana Industries

MEKP, Methyl Ethyl Ketone Peroxide SDS, Safety Data Sheet or MSDS of Manufacturer Exporter

Export Cargo Ex-stock by air Drum Packing Drums Pail Jar Chemical Bottle Bottle Pack Small Pack Big Bags IBC Pallets

MEKP, Methyl Ethyl Ketone Peroxide Manufacturer

MEKP, Methyl Ethyl Ketone Peroxide Specifications of Manufacturer

Methyl Ethyl Ketone Peroxide or MEKP or 2-Butanone Peroxide, SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Product Name/Synonyms: Methyl Ethyl Ketone Peroxide or MEKP or Ethyl methyl ketone peroxide or 2-Butanone Peroxide.
CAS Number 1338-23-4
EINECS EC No.: 215-661-2
Molecular Formula: C8H18O6 or C2H5C(OOH)(CH3)OOC(OOH)(CH3)C2H5
Molecular Weight: 210.22
Relevant uses and uses advised against (if any): Industrial Manufacturing.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910

Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP):
Flammable liquids (Category 3) H226
Organic peroxides (Type F), H242
Acute toxicity, Oral (Category 4) H302
Acute toxicity, Inhalation (Category 4) H332
Skin corrosion (Category 1C), H314

Labeling according Regulation (EC) No 1272/2008

GHS Label Elements
Corrosive
Corrosive
GHS Label Elements
Flammable
Flammable
GHS Label Elements
irritant.png
Irritant

Signal Words: Danger

Hazard statements:
H226: Flammable liquid and vapor.
H242: Heating may cause a fire.
H302: Harmful if swallowed.
H332: Harmful if inhaled
H314: Causes severe skin burns and eye damage.

Precautionary statements:
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P233: Keep container tightly closed.
P240: Ground/bond container and receiving equipment.
P241: Use explosion-proof electrical/ventilating/light/…/equipment.
P242: Use only non-sparking tools.
P243: Take precautionary measures against static discharge.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P362: Take off contaminated clothing and wash before reuse.
P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P309 + P310 IF exposed or if you feel unwell: Immediately call a POISON CENTER or doctor/physician.
P370+378: In case of fire: Use Water spray, Carbon dioxide (CO2), Foam, Dry powder and Sand for extinction.
P403+233+235: Store in a well ventilated place. Keep container tightly closed. Keep cool.
P410: Protect from sunlight.
P501: Dispose of contents/container to authorized agents only.

According to European Directive 67/548/EEC as amended.
Hazard symbol(s):
O = Oxidizing R7
C = Corrosive R34
Xn = Harmful R20/21/22
Flammable: R10
R-phrase(s):
R7 May cause fire.
R 10 Flammable.
R34 Causes burns.
R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.

3. Composition/Information on Ingredients

Product Name/Synonyms: Methyl Ethyl Ketone Peroxide or MEKP or Ethyl methyl ketone peroxide or 2-Butanone Peroxide.
CAS No.: 1338-23-4
EINECS EC No.: 215-661-2
Percentage: 30 to 70% with non-hazardous diluents.

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to physicians: Product is a corrosive material. Use of gastric lavage or emesis is contra-indicated. Possible perforation of stomach or esophagus should be investigated. Do not give chemical antidotes. Asphyxia from glottal oedema may occur. Marked decrease in blood pressure may occur with frothy sputum, and high pulse pressure.

5. Fire Fighting Measures

Flammability of the Product: Flammable.
Auto-Ignition Temperature: SADT: 70C.
Flash Points: 82C
Products of Combustion: Carbon dioxide, Carbon monoxide, fumes.
Fire: Inflammable.
Explosion: Explosive in presence of heat.
Fire Extinguishing Media: Use Water spray, Carbon dioxide (CO2), Foam, Dry powder and Sand for extinction. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Water spray or fog is preferred; if water not available use dry chemical, CO2 or regular foam. Flammable liquid and vapor. Vapors are heavier than air and may travel to a source of ignition and flash back. Vapors can spread along the ground and collect in low or confined areas. Never direct a water jet in the container in order to prevent any splashing of the product which could cause spreading of the fire. Cool containing vessels with water jet in order to prevent pressure build-up, auto-ignition or explosion.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures it may produce toxic or irritating fumes. These substances will accelerate burning when involved in a fire. Some may burn rapidly with flare burning effect. Some may decompose explosively when heated or involved in a fire. May ignite combustibles (wood paper, oil, clothing, etc.). Thermal decomposition can lead to release of irritating and toxic gases and vapors.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: Not Established. Keep it below 0.2 ppm. Provide adequate ventilation.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Clear colorless oliy liquid.
Odor: Mint like odor.
Odor threshold: Not available.
pH: Not available.
Relative density: 1.17
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: 82C.
Auto-ignition temperature: SADT: 70C.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Soluble in water.
Viscosity: Not available.
Molecular Formula: C8H18O6 or C2H5C(OOH)(CH3)OOC(OOH)(CH3)C2H5
Molecular Weight: 210.22

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage. Vapour/air-mixtures are explosive at intense warming. Violent reactions possible with: Strong acids, alkalies, Reducing agents, metallic salts.
Hazardous Decomposition Products: It emits Carbon dioxide, Carbon monoxide & Toxic Fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Heat, strong oxidizing agents, strong reducing agents, strong acids, strong bases. Powdered metals, Organic materials.
Conditions to Avoid: Incompatibles, heat, flame, sparks & light.

11. Toxicological Information

Toxicity data
Oral LD50 = 470 mg/kg ( Rat ) for Methyl Ethyl Ketone Peroxide.
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Teratogenicity: No information found
Reproductive Effects: No information found
Mutagenicity: No information found

12. Ecological Information

Toxicity to fish: No information available.
Persistence and Degradability: Soluble in water Persistence is unlikely.
Bioaccumulation/ Accumulation: No information available.
Mobility: Will likely be mobile in the environment due to its water solubility.
Results of PBT and vPvB assessment: No data available for assessment.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

14. Transport Information

US DOT Classification:
UN Number: UN3105
Shipping Name: ORGANIC PEROXIDE TYPE D, LIQUID ((Methyl ethyl ketone peroxide))
Hazard Class: 5.2; Packing Group: NA.
IATA, ADR/RID & Canada TDG:
UN Number: UN3105
Shipping Name: ORGANIC PEROXIDE TYPE D, LIQUID ((Methyl ethyl ketone peroxide))
Hazard Class: 5.2; Packing Group: NA.

15. Regulatory Information

USA: SARA 311/312 Hazards: Fire Hazard: Yes, Immediate Health Hazard: Acute Yes.

16. Other Information

H226: Flammable liquid and vapor.
H242: Heating may cause a fire.
H302: Harmful if swallowed.
H332: Harmful if inhaled
H314: Causes severe skin burns and eye damage.
Hazard symbol(s):
O = Oxidizing R7
C = Corrosive R34
Xn = Harmful R20/21/22
Flammable: R10
R-phrase(s):
R7 May cause fire.
R 10 Flammable.
R34 Causes burns.
R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.

Disclaimer:
**************************
Our company provides this SDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

Contact MEKP, Methyl Ethyl Ketone Peroxide Manufacturers Suppliers Exporters:

Ana Industries P. LTd.
email: info@anaindustries.org
Call: +912223774610
Houston USA, Dubai UAE Dahej & Mumbai India.